Wall Mounting Electronics Water Detection Device (Needs the WSU sensor) WINLAND ELECTRONICS WB-200

Description

Available Stock USA

Downloads:

The WaterBug® 200 is a water detection device ideal for computer rooms, document storage areas, warehouses, sump pumps and basements, etc. WaterBug sensors activate the alarm when a conductive bridge is formed between 2 contacts. Protect your assets with the WB-200.

Use in conjunction with alarm panel, wireless transmitter, etc. Run as many as 6 sensors wired in parallel up to 100’ (30.48 m) away from the unit for wide area protection.

• Hardwire powered
• Includes one standard unsupervised surface sensor 1040 (W-S-U)
• Accepts standard unsupervised under carpet sensors 1041 (W-UC-U)
• One Form C relay output (N.O./N.C.)

Product Specifications.

• Power Requirements: 8 to 28 VDC @ 35mA / 8 to 28 VAC @ 100 mA
• Operating Temp: 32 to 130°F (0 to 54 °C)
• Output: Form C (N.O./N.C.) / 1 Amp @ 30 VDC, resistive / 1 Amp @ 24 VAC, resistive
• Audible Alarm: Install a BZ-1 for local buzzer
• Maximum Distance Between Console and Sensors: 1-2 probes; max 200’ (61 m) / 3-6 probes; max 100’ (30.5 m) per sensor
• Maximum Sensors per Console: 6
• Console Dimensions: 4.1 x 2.36 x 1.18” (10 x 6 x 3 cm) with flanges

Every package contains:
• 1 WB-200
• 1 Surface Probe – Unsupervised (W-S-U)
• 1 Installation/Operating Instructions Guide

Additional information