V-PLEX(R) Addressable Photoelectric Smoke Detector with Fixed Temperature/Thermal Detector HONEYWELL HOME RESIDEO 5193-SDT

Description

Available Stock USA

• Heat Sensor: (Model 5193SDT/A):
                   135°F (57.2°C)
                    Fixed Temperature Electronic Thermistors
• Operating Ambient Temperature Range: 32° to 100°F (0° to 38°C)
• Operating Humidity Range: 0 to 95% RH non-condensing
• Storage Temperature Range: -4° to 158°F (-20° to 70°C)
• Diameter (including base): 5.3 inches (13.46 cm)
• Height (including base): 2.0 inches (5.08 cm)
• Weight: 6.3 oz. (178.6 g)
• Agency Listing: UL 268; CAN/ULC S531
• System Voltage Range: 7-14V
• Standby Current (maximum @ 12V)
                     LED off: 1.2mA
                     LED on: 2.8mA

• Easy Installation: Installation is simplified by the use of a mounting base that may be pre-wired to the system, allowing the detector to be easily installed or removed for maintenance or service. (See Tamper-Resistant Feature/Wiring).
• LED Status Indicators: Two LEDs (green and red) provide local visual indication of the detector’s status – including normal operation, alarm, out of sensitivity and trouble conditions.
• Test button: This button allows the user to perform periodic testing of the detector’s circuitry and verify that the detector is within the sensitivity limits.
• Versatile Mounting: Mounting is made simple with the included hardware and the large mounting ports, which accommodate drywall anchors for easy surface mounting. (See Tamper-Resistant Feature/Wiring).
• Tamper Protection and Tamper Resistance: The detector
  contains a built-in tamper switch that can communicate back to the control panel in the event the detector is removed from its base. For an added level of security, the detector also includes a tamper resistant element that prevents removal from the base without the use of tools. (See Tamper-Resistant Feature/Wiring).

Description:
Honeywell’s V-Plex Addressable Photoelectric Smoke Detectors are designed to provide open area protection and to be used with compatible UL or ULC-listed Honeywell control panels that support V-Plex technology. The detectors incorporate a state-of-the-art optical sensing chamber and an advanced microprocessor. Built-in Drift Compensation algorithms automatically maintain proper operation at factory calibrated detection levels, even when sensitivity is altered due to the presence of contaminates settling into the unit’s chamber. The 5193SDT/A also features a restorable, built-in, fixed temperature (135°F/57.2°C) thermal detector.