Tower Stabilizer for STZ-35G Sections, Hot-dip Galvanized SYSCOM TOWERS SEST-35G

Description

Available Stock USA

A stabilizer or anti-twist arm, as is also known, is an element designed to hold the tower at a certain height to prevent movement due to strong wind currents

Unlike a flange (which is held at one point on each side of the tower) a stabilizer is held at 2 points per side, i.e., at the same height, it will be held at 6 points, which prevents excessive twisting in the tower and a better structure rigidness.

When do you install a stabilizer?

A stabilizer is not a required piece when assembling a tower. Generally, a stabilizer is installed when:
– If there is an antenna with a large drag surface (equal or greater than 1 m of diameter).
– When there are strong winds due to terrain conditions.
– In high precision wireless links

It is recommended to replace the installation of a flange when adding a stabilizer since we remember that the more cables we put to the tower, the heavier it will be and the more cargo we will deliver to the ground.

Physical Characteristics:
Material: Electrolysis galvanized steel.
Compatible with section: STZ35. 
Side width: 70 cm.
Weight: 12.45 Kg.

Device includes:
3   – Subjection brackets with nuts.
3   – Corners
3   – Channels
24 – Screws with safety nuts for assembly.

Product Manufactured Under ISO 9000 Norms

Installation image

Additional information